Probably the the most similar bondwood hull to my boat I have seen, even looks to have same ski pole and screen. Chine to deck on ronda is more parallel!
Thank's I'm not happy with the paint and epoxy products that I used. the blue paint inside the hull has not adhered and the epoxy has had issues. spar varnish next time for the clear coat. Will strip the inside of the hull and use a primer then color, not a one coat dose it all. I'm open to suggesti...
Yee Harr!!! I hope to be there! Will be good to catch up
We will be at Glenbawn Dam for a week from December 27 and most weekends if anybody is interested in coming for a run! Was at Glenbawn last Thursday afternoon and the water is 21deg. Air temp is not cooperating yet though!
Ready for some warm weather and Glenbawn Dam :D ! Have wanted to be able to adjust the trim without having to reach down, pull up and lock the hand trim lever. Foot override doesn't lock which will be good for crossing wakes. http://i819.photobucket.com/albums/zz111/echotoo/P1110199_zpssfuzjo3u.jpg ...
I'm running 2x2bbls and need both accelerator pumps. They are not the Holley/ford but a generic replacement, I had to machine pump rods and fit modern pump buckets as the leather ones had perished!
Mike Davidson "Flat attack" is SA has rebuild kits for Holley 94's and may have the parts you require. http://www.flatattackracing.com/ Exactly what parts do you need? http://www.vanpeltsales.com/FH_web/FH_images/FH_fuelsystem-pics/Flathead_Carbs_ford1938to48.jpg Yes you should stick with ...
I'm no expert but, 0.36mm is very little considering the amount of twist/flex that the hull, shaft etc have. The last strut bush I installed now has 250 hours on It, initially it was a fairly neat fit and wore quickly then settled. It has a slight rattle if I grab the prop shaft and give it a shake....